MechanicsFundamentofProcessEquipment過程裝備力學基礎（朱孝欽）（英文版）

本書著重介紹過程裝備研究或設計中所涉及力學方面的基本理論和基本知識，全書共8 章，包括緒論、彈塑性力學概論、彈性力學的基本概念及其基本方程、彈性力學的平面問題、塑性力學基礎簡述、旋轉薄殼的基本理論、厚壁圓筒的彈塑性力學分析、薄板理論等內容。
本書可作為過程裝備與控制工程專業本科或研究生“過程裝備力學基礎”雙語課程教材，也可供相關專業的工程技術人員參考。

雙語教學是隨著我國高等教育改革的不斷深入而產生的，并且呈現出課程門數不斷增加的發展趨勢。雙語教學既可以在教授科技知識的同時幫助學生穩步提升外語應用能力，還可以吸取國外一些好的教學方法，因此，近年來得到了較快的發展。
對于過程裝備與控制工程專業的本科教學，由于國外高等工科院校沒有對應的專業，因而相應的原版英文教材很少，給雙語教學帶來了較大的困難，所以我們編寫了本書。本書為云南省普通高等學?！笆濉币?guī)劃教材，同時也是昆明理工大學省級一流本科專業過程裝備與控制工程專業建設的成果之一。本書著重介紹過程裝備研究或設計中所涉及力學方面的基本理論和基本知識，目的是使學生在提高英語應用能力的同時為隨后的專業課程學習奠定基礎，在過程裝備與控制工程專業人才培養過程中起著較為重要的作用。本書在編寫過程中注重理論與方法的有機結合，并注意吸取國外教材一些好的編寫方法，力求通俗易懂、簡明實用。
本書由朱孝欽主持編寫。陳濤編寫第1章、第2章和第3章；朱孝欽編寫第4章、第7章和第8章；王修武編寫第5章；孫雪劍編寫第6章。全書由朱孝欽統稿。本書得到美國休斯敦大學Fan Wang 教授的審閱和指導。
本書得到云南省教育廳的資助，也感謝昆明理工大學教務處、化學工程學院的大力支持。
我們希望本書能對過程裝備與控制工程專業的雙語教學起到一定的推動作用，也希望關注、使用本書的教師和同學提出寶貴的意見。
由于編者水平有限，書中難免有些疏漏，敬請讀者批評指正。

編者
2023年8月

Chapter 1　Introduction 1
1.1　Process Industry 1
1.2　Process Equipment 2
1.2.1 Basic concepts of process equipment 2
1.2.2 Basic composition and structures of process equipment 3
1.3　The Mechanical Problems in the Design or Research of Process Equipment 4
Problems 5

Chapter 2　Overview to Elastoplastic Mechanics 6
2.1　Research Objects，Research Methods and Basic Tasks of Elastoplastic Mechanics 6
2.2　Basic Assumptions of Elastoplastic Mechanics 9
2.3　Elasticity and Plasticity 10
2.3.1 Analysis of stress-strain curve obtained from the tensile test of a typical plastic material—low-carbon steel 11
2.3.2 Characteristics of elastic and plastic deformations 13
2.3.3 Several stress-strain simplified models in the analytical theory of plastic mechanics 14
2.4　Load Classification 16
Problems 16

Chapter 3　Basic Concepts and Equations of Elastic Mechanics 18
3.1　External Force，Internal Force and Stress 18
3.1.1 External force 18
3.1.2 Internal force 19
3.1.3 Stress 20
3.2　Stress State and Stress Tensor at A Point 22
3.3　The Concepts of Deformation and Strain 24
3.3.1 The concept of deformation 24
3.3.2 The concept of strain and the geometric equations 25
3.4　Equilibrium Equations and Physical Equations of Elastic Mechanics 28
3.4.1 Equilibrium equations 28
3.4.2 Physical equations 30
Problems 32

Chapter 4　Plane Problems of Elastic Mechanics 34
4.1　Two Types of Plane Problems 34
4.1.1 Plane stress problem 34
4.1.2 Plane strain problem 35
4.2　Basic Equations for Plane Problems 37
4.2.1 Equilibrium equations 37
4.2.2 Geometric equations 37
4.2.3 Physical equations 38
4.3　Boundary Conditions for Plane Problems 39
4.4　The Saint-Venants Principle 41
4.5　Methods for Solving Plane Problems 42
4.5.1 Methods for solving elastic mechanics problems 42
4.5.2 Solving elastic mechanics plane problems by stress method 43
4.6　Stress Function or Biharmonic Function 46
4.7　Polar Coordinate Form of the Basic Equations 49
4.7.1 Equilibrium equations in polar coordinates 50
4.7.2 Geometric equations in polar coordinates 51
4.7.3 Physical equations in polar coordinates 54
4.7.4 Stress functions and compatibility equations in polar coordinates 54
Problems 56

Chapter 5　Key Concepts of Plastic Mechanics Fundamentals 59
5.1　Introduction 59
5.2　Maximum Shear Stress and Octahedral Shear Stress 60
5.2.1 Maximum shear stress 60
5.2.2 Octahedral shear stress 61
5.3　Yield Criterions 63
5.3.1 The Tresca yield criterion 64
5.3.2 The Mises yield criterion 65
5.4　Loading Theorem and Unloading Theorem 66
5.4.1 Loading theorem 66
5.4.2 Unloading theorem 67
Problems 68

Chapter 6　Basic Theory of Revolutional Thin-walled Shells 69
6.1　Overview 69
6.2　Geometric Characteristics of A Revolutional Thin-walled Shell 70
6.3　Non-moment Theory of Revolutional Thin-walled Shells 72
6.3.1 Overview of non-moment theory 72
6.3.2 Basic Equations of non-moment theory 74
6.4　Membrane Stresses in A Special Revolutional Thin-walled Shell 77
6.4.1 Spherical shell 78
6.4.2 Cylindrical shell 78
6.4.3 Conical shell 79
6.4.4 Ellipsoidal shell 79
6.5　Edge Stress in A Revolutional Thin-walled Shell 82
6.5.1 The cause of edge stress 82
6.5.2 The characteristics of edge stress and its treatment in pressure vessel structure 85
Problems 86

Chapter 7　Elastoplastic Mechanics Analysis of Thick-walled Cylindrical Shell 89
7.1　Introduction 89
7.2　Elastic Analysis of A Thick-walled Cylindrical Shell 90
7.2.1 Basic equations of a thick-walled cylindrical shell 90
7.2.2 Stress and displacement solutions of a thick-walled cylindrical shell 95
7.3　Stress Analysis of Combinatorial Thick-walled Cylindrical Shells 101
7.3.1 Prestress calculation of a combinatorial cylindrical shell 102
7.3.2 Integrated stress calculation of a combinatorial cylindrical shell 104
7.4　Elastoplastic Stress Analysis of A Thick-walled Cylindrical Shell and Autofrettage Processing Technology 106
7.4.1 Elastic limit analysis 107
7.4.2 Elastoplastic stress analysis 108
7.4.3 Plastic limit analysis 112
7.4.4 Autofrettage of a thick-walled cylindrical shell 113
Problems 120

Chapter 8　Thin Plate Theory 123
8.1　Basic Concepts and Assumptions of Thin Plate 123
8.1.1 Basic concepts of thin plate 123
8.1.2 Basic assumptions of thin plate 125
8.2　Axisymmetric Problem of Circular Flat Plate 126
8.2.1 Basic equations for axisymmetric bending of a circular flat plate 127
8.2.2 Stresses in a circular flat plate 131
8.2.3 Stresses in a ring plate under an axisymmetric load 139
Problems 140

References 142